21pcs/set Underwater Waterproof Case Diving Housing Mount for GoPro Hero 5/6/2018/Black
The anti-fog insert is usually used with the waterproof case. When the waterproof case is used, the camera will heat up. The waterproof case is closed, so the camera will generate fog and heat inside. The fog of the lens of the waterproof case will affect the camera\'s shooting effect, causing the photo or video to be foggy or unclear. Put a few anti-fog inserts inside the waterproof case, and they can absorb the misty water inside the waterproof case, so that the photos or videos taken are not affected. (Anti-fog inserts can be recycled for 2 to 3 times. After use, they can be dried in a microwave oven or dried for reuse.)
The bottom of the adapter is a 1/4 nut that can be connected to some selfie stick or tripod with a 1/4 screw. It is very widely used. The top is a two-foot version that can be directly connected to the camera\'s waterproof case for conversion.
Applicable for GoPro Hero4/Hero3+/Hero3 and SUPTig sports DV universal, the metal part is stainless steel, which is more labor-saving and convenient to use.
Screen tempered film
The tempered film was subjected to a tempering time of 9 hours. With high hardness, even you use a metal to scrape and there is no trace. The tempered film will be automatically attached to the camera\'s screen. It can protect your camera\'s screen from being scratched.
Real machine 1:1 molded and fit camera perfectly. The lens cover is also very soft and does not scratch the lens of the camera. Protect your camera more thoroughly.
The filter is used 5M or more underwater. The red light is absorbed by water 5M or deeper underwater. The photosensitive element cannot sense red light and the red filter can be used to supplement the lost red light and the underwater color is restored.
Anti Lost Rope
It can prevent the camera from falling during your use.
1. This model can be used without directly disassembling the UV lens of the camera. (You need to remove the UV for the original waterproof case)
2. The lens frame of the waterproof case is made of aluminum alloy. (The aluminum alloy material will heat up during the use of the camera, and the aluminum alloy material has the function of dissipating heat.)
3. The lens of the waterproof case is made of tempered glass. The strength of the tempered glass is several times higher than that of ordinary glass and it is resistant to bending. The increase in load carrying capacity improves the fragile nature, and even if the tempered glass is broken, it shows small fragments without sharp angles, and the damage to the human body is greatly reduced. The quenching and rapid heat properties of tempered glass are 3 to 5 times higher than that of ordinary glass, and generally can withstand temperature changes of more than 250 degrees, which has obvious effects on preventing thermal cracking. It is one of the safety glasses.
4. The key screws of the waterproof case are made of 316 stainless steel. The 316 stainless steel is resistant to the erosion of the marine and corrosive industrial atmosphere. Good oxidation resistance and heat resistance. (Some people who use iron or 304 stainless steel on the market are very likely to rust after diving in the sea.)
5. The diving depth of the waterproof case is 45M underwater to meet the needs of users diving. (General people diving in 10M-20M underwater and deep dive 30M-40M underwater)
Gross weight: 178g
Packing size: 120 x 85 x 48mm/4.72 x 3.35 x 1.89\"
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 x Waterproof Case
1 x Red Filter
1 x Screen Tempered Film
1 x Lens Cover
1 x Hand Rope
1 x Base
1 x Adapter
1 x Aircraft Screw
1 x Long Screw
12 x Anti-Fog Inserts (1 Pack)